cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
639
Views
0
Helpful
7
Replies

FXS / FAX issue with 2821 router

rescueskier
Level 1
Level 1

I am having an issue setting up a fax machine connected to a VIC2-2FXS card. The issue is that when I dial in with the fax machine connected, it goes directly to a dial tone. If I dial 9 and a number I can place a call. (not the desired result) If I connect up a analog phone, it rings and I can answer and talk just fine.

For configuration, I am using IOS 12.4(19b) [I have tried various IOS version]

My clock settings are network-clock-participate wic 0

network-clock-select 1 E1 0/0/0

Yes, this is a E1 line located in UK.

The port is:

voice-port 0/3/0

And the dial peer is:

dial-peer voice 120 pots

description Fax Machine

destination-pattern 980871

port 0/3/0

I am getting 6 digits from the provider so I am matching on all digits.

I am doing this in 3 other offices in US and it works fine, so I am stumped to what is wrong.

Attached it a debug of the q931 and dialpeer.

7 Replies 7

Chad Stachowicz
Level 6
Level 6

I think you need a station-id command under the voice-port... Also is this a 3G fax?

HTH, please rate useful posts

Chad

dvowell
Level 1
Level 1

Hi,

Do you have direct-inward-dial configured on the inbound POTS dial-peer

Dave

Here is all my dial-peers.

dial-peer voice 201 voip

description call routing for incoming calls (subscriber)

preference 1

destination-pattern 98....

session target ipv4:172.30.9.2

dtmf-relay h245-alphanumeric

!

dial-peer voice 202 voip

description call routing for incoming calls (publisher)

preference 2

destination-pattern 98....

session target ipv4:172.30.9.1

dtmf-relay h245-alphanumeric

!

dial-peer voice 100 pots

description Call Routing for Emergency

destination-pattern 9999

progress_ind setup enable 3

progress_ind connect enable 8

direct-inward-dial

port 0/0/0:15

forward-digits 3

!

dial-peer voice 103 pots

description call routing for international calls

translation-profile outgoing outgoing

destination-pattern 900.T

progress_ind setup enable 3

progress_ind connect enable 8

direct-inward-dial

port 0/0/0:15

prefix 00

!

dial-peer voice 104 pots

description Call routing for UK Mobile

destination-pattern 907[1-9]........

progress_ind setup enable 3

progress_ind connect enable 8

port 0/0/0:15

forward-digits 11

!

dial-peer voice 105 pots

description Call routing for Freephone (800 numbers)

destination-pattern 908T

progress_ind setup enable 3

progress_ind connect enable 8

port 0/0/0:15

prefix 08

!

dial-peer voice 101 pots

description Call routing for Local Dialing

destination-pattern 9020[2-9].......

progress_ind setup enable 3

progress_ind connect enable 8

direct-inward-dial

port 0/0/0:15

forward-digits 8

!

dial-peer voice 106 pots

description Call routing for Local Dialing

destination-pattern 9[2-9].......

progress_ind setup enable 3

progress_ind connect enable 8

direct-inward-dial

port 0/0/0:15

forward-digits 8

!

dial-peer voice 110 pots

description Call Routing for Operator

destination-pattern 9100

progress_ind setup enable 3

progress_ind connect enable 8

port 0/0/0:15

forward-digits 3

!

dial-peer voice 111 pots

description Call Routing for Services

destination-pattern 91..

progress_ind setup enable 3

progress_ind connect enable 8

port 0/0/0:15

forward-digits 3

!

dial-peer voice 112 pots

description Call Routing for Services

destination-pattern 918..

progress_ind setup enable 3

progress_ind connect enable 8

port 0/0/0:15

forward-digits 4

!

dial-peer voice 113 pots

description Call Routing for Directory Services

destination-pattern 9118...

progress_ind setup enable 3

progress_ind connect enable 8

port 0/0/0:15

forward-digits 6

!

dial-peer voice 114 pots

description Call Routing for Childline

destination-pattern 908001111

progress_ind setup enable 3

progress_ind connect enable 8

port 0/0/0:15

forward-digits 8

!

dial-peer voice 115 pots

description Call Routing for NHS Direct

destination-pattern 908454647

progress_ind setup enable 3

progress_ind connect enable 8

port 0/0/0:15

forward-digits 8

!

dial-peer voice 116 pots

description Call routing for Freephone (500 numbers)

destination-pattern 905T

progress_ind setup enable 3

progress_ind connect enable 8

port 0/0/0:15

prefix 05

!

dial-peer voice 117 pots

description Call routing for National Dialing

destination-pattern 901[2-9]........

progress_ind setup enable 3

progress_ind connect enable 8

direct-inward-dial

port 0/0/0:15

forward-digits 11

!

dial-peer voice 1 pots

preference 1

incoming called-number .

direct-inward-dial

!

dial-peer voice 120 pots

description Fax Machine

destination-pattern 980871

port 0/3/0

!

dial-peer voice 180 voip

description Catchall VoIP Dial Peer

voice-class codec 1

voice-class h323 1

incoming called-number .

dtmf-relay h245-alphanumeric

fax rate disable

fax protocol pass-through g711ulaw

no vad

did you add that station-id command? Also enable fax-relay..

HTH,

Chad

I have added the command, but no change. This not a fax relay from router to router. The call is being received by ISDN/E1 line in the router itself. Also, it is a G3 fax, which I have disabled the G3 on.

can you hook me up witha debug voip ccapi inout

please..

Chad

Here is the voip ccapi inout debug

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: