Giuseppe Larosa Fri, 07/11/2008 - 13:11

Hello Vinoth,

in your router there is a network module with some A/S serial interfaces.

These interfaces can be used as Asynchronous serial line.

This allows to connect the async line to a dialup modem. An Async interface has no clock signal and sends one octet at a time.

See the following link

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800a93f1.shtml

On platforms like C3640 the async number tells in what slot the network module is.

Hope to help

Giuseppe

Actions

This Discussion