mark policy w/ trust dscp

Unanswered Question

I have a 7604 as a WAN router. I need to use a service policy to mark dscp based on a subnet address using an ACL. In addition to this service policy, I also need to honor dscp markings from things like IP Phones. It appears that its improper to use a service policy input on an interface to set dscp while also using the mls qos trust dscp command on the same interface.

Is there a workaround for something like this, on the same router?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rupesh Kashyap Fri, 07/11/2008 - 04:46

The logic is same like-

1. Create ACL for the source and destinatiion

2. Create Class Map and match the ACL

3. Create Policy Map and add Class-map in that. Set Voice as DSCP EF or AF41.

4. Bind the Policy Map with interface.

Actions

This Discussion