asa accessing problem after Restoring Single Context Mode

abeid · ‎07-11-2008

HI,

I have done the basic configuration on asa 5520. For active active availablity i changed the mode to multiple context mode and encountered some issues with the setup and i restored back to single context mode by the command mode single in global config mode.

After the asa rebooted i am not able to access the asa through telnet, http or asdm.

I tried with console cable as well but could not get in to the asa. Can any one please let me know how can i access the asa

Regards,

Prasant.Ch

abeid · ‎07-11-2008

Hi,

Can anybody please tell me the settings required for hyper terminal for console connectivity.

Is it the default settings

Bits per Second 9600

Data Bits 8

Parity none

stop bits 1

flow control none

purohit_810 · ‎07-11-2008

Yes It is default. Or Click on restore default.

- Dharmesh