07-11-2008 07:19 AM - edited 03-11-2019 06:12 AM
We have one last problem before we go live with our UC 520 demo unit. I've got it set up as the NAT/PAT router on our network, and all seems to be working fine except for PPTP VPN, incoming and outgoing. I can't connect to any of my clients, and I can't connect in from home. I know this is an issue with PAT, but it's been addressed with the version we're running right? (Version 12.4(11r)XW3, RELEASE SOFTWARE (fc1))
Relevant config attached.
Thank you.
Solved! Go to Solution.
07-11-2008 08:55 AM
for pptp you need permit GRE as well
By I'm not sure that it will work with PAT
access-list 104 permit gre any host XX.148.97.102
07-11-2008 08:55 AM
for pptp you need permit GRE as well
By I'm not sure that it will work with PAT
access-list 104 permit gre any host XX.148.97.102
07-11-2008 09:40 AM
Thank you very much!
Worked like a charm, after I remembered that this line has to be in the config before the deny entries.
07-11-2008 11:05 AM
Good :))
[Pls RATE if HELPS]
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide