Solved: Windows PPTP VPN

ryan.pederson · ‎07-11-2008

We have one last problem before we go live with our UC 520 demo unit. I've got it set up as the NAT/PAT router on our network, and all seems to be working fine except for PPTP VPN, incoming and outgoing. I can't connect to any of my clients, and I can't connect in from home. I know this is an issue with PAT, but it's been addressed with the version we're running right? (Version 12.4(11r)XW3, RELEASE SOFTWARE (fc1))

Relevant config attached.

Thank you.

a.alekseev · ‎07-11-2008

for pptp you need permit GRE as well

By I'm not sure that it will work with PAT

access-list 104 permit gre any host XX.148.97.102

View solution in original post

a.alekseev · ‎07-11-2008

for pptp you need permit GRE as well

By I'm not sure that it will work with PAT

access-list 104 permit gre any host XX.148.97.102

ryan.pederson · ‎07-11-2008

Thank you very much!

Worked like a charm, after I remembered that this line has to be in the config before the deny entries.

a.alekseev · ‎07-11-2008

Good :))

[Pls RATE if HELPS]