1252 AP stop attaching clients

Unanswered Question
Jul 11th, 2008
User Badges:

Hi all:


I just installed a 4402 with some APs 1252, with version 4.2.130. The problem I have is that some APs suddenly stop attaching clients. I checked the controller and the AP is still joined to the controller but with no clients at all. To get the AP operational I have to reboot the AP; has anyone experienced the same problem?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Scott Fella Fri, 07/11/2008 - 14:16
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Are the radios status up at the time or not? Are the ap's on power injectors, AC adapter or powered from a switch?

Scott Fella Sat, 07/12/2008 - 11:30
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Also, not knowing how everything is setup. Are you sure the ap is not associating the client, or is the client associating to a distant ap?

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode