CM Incremental Upgrade :- apply to Active or Inactive partition ??

Answered Question
Jul 13th, 2008
User Badges:

Hi,


I have a CM system with 5.0 (inactive) and 5.0(4) (active).


TAC suggested that I upgrade from 5.0 --> 5.0(5) ---> 5.1(3)


Now, to upgrade from 5.0(4) --> 5.1(3) do I need to first change my


Active Partition back to 5.0, and then upgrade the inactive partition ?


Or do I stay in my active patition (most current) and start the upgrade process ?



Thanks

Correct Answer by Ayodeji Okanlawon about 8 years 11 months ago

I will follow thet docs. That for me is reliable.


Please rate useful posts...

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Ayodeji Okanlawon Sun, 07/13/2008 - 06:27
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Hi,


You can upgrade directly from 5.0(4) to 5.1.1 and then to 5.1.(3).


So you should start from 5.0(4) which is your active partition and upgrade to 5.1.1 and then to 5.1.3.


The document below shows the upgrade paths available for ccm


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008086cc7c.shtml

shahedvoicerite Sun, 07/13/2008 - 07:30
User Badges:

Thanks!


TAC seemd to suggest that an upgrade from 5.0(4c) to 5.1(3?) was possible, although the docs disagree.


To be cautious, I will try upgrading to 5.1(1c), and then to 5.1(3c)


Thanks.


Correct Answer
Ayodeji Okanlawon Sun, 07/13/2008 - 07:47
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

I will follow thet docs. That for me is reliable.


Please rate useful posts...

Actions

This Discussion