7912G firmware upgrade from SIP to SCCP

Unanswered Question
Jul 14th, 2008

Want to change firmware type for my 7912G. It is based on SIP image CP7912010301SIP050608A

Version 1.3.1(050608A)

Can I convert it to SCCP CP7912080004SCCP080108A.sbin which is the latest version?

Many thanks. I've spent more than 4 hours reading and testing p.bevilacqua advice, but no luck.

I tried to use a laptop as a tftp server and use a layer3 switch as tftp server. Here is the tftp debug from the layer3 switch:

Jul 14 18:06:43.705 AEST: TFTP: read request from host 172.22.1.91(16262) via Vlan250

Jul 14 18:06:43.705 AEST: TFTP: Opened flash:gk00141c48d472, fd 0, size 45

Jul 14 18:06:43.705 AEST: TFTP: Sending block 1 (retry 0), socket_id 0x1D01490

Jul 14 18:06:43.730 AEST: TFTP: Received ACK for block 1, socket_id 0x1D01490

Jul 14 18:06:43.730 AEST: TFTP: Finished flash:gk00141c48d472, time 00:00:00

ADG-DCN-3560-1#

Jul 14 18:07:00.901 AEST: TFTP: Server request for port 16264, socket_id 0x1CFE900

Jul 14 18:07:00.901 AEST: TFTP: read request from host 172.22.1.91(16264) via Vlan250

Jul 14 18:07:00.901 AEST: TFTP: Opened flash:gk00141c48d472, fd 0, size 45

Jul 14 18:07:00.901 AEST: TFTP: Sending block 1 (retry 0), socket_id 0x1CFE900

Jul 14 18:07:00.918 AEST: TFTP: Received ACK for block 1, socket_id 0x1CFE900

Jul 14 18:07:00.918 AEST: TFTP: Finished flash:gk00141c48d472, time 00:00:0

Thanks in advance.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 5 (4 ratings)
lincun-qian Mon, 07/14/2008 - 04:37

I read a lot useful information you've given.

1. download bmp2logo.zip from cisco web site

2. create txt file gk00141c48d472.txt:

{

#txt

upgradecode:3,0x601,0x0400,0x0100,192.172.22.1.90,69,0x080108A,CP7912080004SCCP080108A.sbin

192.172.22.1.90 is the ip address of the tftp server

}

3. C:\000>dir

14/07/2008 05:16 PM .

14/07/2008 05:16 PM ..

09/05/2002 10:43 AM 62,976 cfgfmt.exe

14/07/2008 06:02 PM 45 gk00141c48d472

14/07/2008 10:30 PM 97 gk00141c48d472.txt

17/05/2002 05:21 PM 3,022 ptag.dat

4 File(s) 66,140 bytes

2 Dir(s) 7,112,564,736 bytes free

C:\000>cfgfmt gk00141c48d472.txt gk00141c48d472

C:\000>

4. copy file gk00141c48d472 and

CP7912080004SCCP080108A.sbin to the tftp server.

5. power reset IP Phone 7912

lincun-qian Mon, 07/14/2008 - 04:54

I saw that. I have to wait another 48 hours to test that as I do not have PoE switch with me at the moment. Appreciate it.

I will update here after testing.

One more thing, when I tried this ont the 7912G, it looks nothing happened:

try the reset sequence: power off, press and hold #, power on, wait for led to flash in pattern, release #, press in sequence 123456789*0#.

Paolo Bevilacqua Mon, 07/14/2008 - 05:05

Hi mate, the 7902/05/12 do not support any keypad reset sequence.

Thanks for the appreciation and good luck!

lincun-qian Mon, 07/14/2008 - 05:05

I bought the 7912G from ebay and it comes with SIP image. I would not buy it if I knew that. Should have asked the seller before click the button!!!

When I tried to disable the DHCP on 7912G, it ask me to input the password, is there anyway to reset the password?

Paolo Bevilacqua Mon, 07/14/2008 - 05:17

No worries, just use a little bit of patience and the phone will do what you want.

The password is set via config file. Perhaps try something like 0000 or 1234.

lincun-qian Wed, 07/16/2008 - 21:08

Thanks a lot. I still do not have access to a PoE switch. I will update result here after the test.

lincun-qian Fri, 07/18/2008 - 05:29

The password is 1234. After fix the ip address, everything is working now. Thanks again.

Actions

Login or Register to take actions

This Discussion

Posted July 14, 2008 at 12:21 AM
Stats:
Replies:9 Avg. Rating:5
Views:1236 Votes:0
Shares:0
Tags: No tags.

Discussions Leaderboard

Rank Username Points
1 21,026
2 15,047
3 10,314
4 7,999
5 4,856
Rank Username Points
145
95
72
66
55