07-14-2008 01:31 AM - edited 02-21-2020 03:49 PM
Hi,
I have a 1841 router with Ifirewall IOS behind a public IP.
On the remote side I have a 1801 which is behind a modem/router.... therefore it has a private adress on its outside interface.
Central Router (Pub IP)---- Internet ---- (Pub IP)Modem/router ---- (Private IP)Router
Is it possible to setup an IPSEC VPN ? I try a lot of thing but nothing work....
Does anyone has a solution with a working configuration?
Rgards
07-14-2008 01:38 AM
you need to have a static NAT translation on the Central Router for Private IP of your 1841 router
07-14-2008 10:16 AM
I'm not sure I understand your answer....
But something else... The 1801 router is behind a router/modem that get a dynamic IP...
07-14-2008 01:01 PM
you can run DMVPN
http://cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801eafcb.shtml
or
you use this
http://cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080093f86.shtml
or
1841 with public ip can be configured as esvpn server and 1801 can be ezvpn client
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: