BR352 and SNMP

Unanswered Question
Jul 14th, 2008


I have a wireless link via two BR352 with the latest VXWorks Software 12.05.

I would like to monitor the bridge link traffic via SNMP to create graphs.

I am not able to do that. I enable the SNMP in the bridges via the web interface, but the SNMP ports is closed and I cannot get any data.

Can someone help me?

The bridges are configured as:



Network GW:

Graph server (the one who connects to the various devices of the network to get SNMP infos) is

BR352 fw is 12.05

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
didyap Fri, 07/18/2008 - 14:48

To resolve the issue Create a user with the user manager. For a community string with read access, only give the user SNMP permission. For a community string with write access, give the user all permissions. The user name is the community string. But keep in that Normal users should not have SNMP permission.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode