cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
350
Views
0
Helpful
2
Replies

2950 - 3524 passing QnQ tag ?

jsosebee22
Level 1
Level 1

Hello -

I have device that I pushing QnQ tags on both ends across a 2950 w/a trunk --- to a 3524.

Is it possible to pass QnQ frames across this trunk or do I need to be running MPLS ?

Not having any luck.

1 Accepted Solution

Accepted Solutions

lee.reade
Level 4
Level 4

Hi,

You mean you have a trunk between the 2950 and 3524 switch?

Also, I dont think the qinq support is on the 2950;

http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_22_ea11x/command/reference/cli2.html

As the command "switchport mode dot1qtunnel" is not listed in the command ref.

HTH

LR

View solution in original post

2 Replies 2

lee.reade
Level 4
Level 4

Hi,

You mean you have a trunk between the 2950 and 3524 switch?

Also, I dont think the qinq support is on the 2950;

http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_22_ea11x/command/reference/cli2.html

As the command "switchport mode dot1qtunnel" is not listed in the command ref.

HTH

LR

Yes - trunk between the two and all is well but not passing the QnQ frames.

yea - that's what I was thinking but wanted to ask.

thanks !

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: