6509 - X6148A: FRU-power failed

Unanswered Question
Jul 14th, 2008

Chassis: 6509

IOS: 12.2(18)SXF8

The new X6148A-GE-TX card reports:

%C6KPWR-SP-4-DISABLED: power to module in slot 6 set off (FRU-power failed)

The same model card works fine in this slot.

The only difference on the new card is a special-shaped power socket that allows the card to be inserted into slot 5 or 6 only.

Is there a workaround?

Thank you.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Mon, 07/14/2008 - 12:30

Hello Lev,

it looks like there is a specific daughter card for Power over Ethernet

see the following link

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/release/notes/OL_4164.html

the part number is WS-F6K-GE48-AF

it requires 0.18 [email protected] V

Hope to help

Giuseppe

lioncool Mon, 07/14/2008 - 12:45

Thanks for the reply.

The PoE is not an issue as I don't have WS-F6K-GE48-AF daughter card on the X6148A-GE-TX.

Actions

This Discussion