CCME FXO Trunk Groups and Outbound ephone-dn

Answered Question
Jul 14th, 2008
User Badges:

I currently have the following scenario, I have two FXO trunk groups on a four port FXO card.


trunk group FXO1

!

!

trunk group FXO2


voice-port 0/1/0

trunk-group FXO1

connection plar 75377

caller-id enable type 2

!

voice-port 0/1/1

trunk-group FXO1

connection plar 75377

caller-id enable type 2

!

voice-port 0/1/2

trunk-group FXO2

connection plar 75378

caller-id enable type 2

!

voice-port 0/1/3

trunk-group FXO2

connection plar 75378

caller-id enable type 2


I have two phones, one phone should use FXO1 and the other phone should use FXO2 for outbound calls.


My outbound Dial-Peers are arranged in the following manner.


dial-peer voice 7 pots

trunkgroup FXO

corlist outgoing css-loc

destination-pattern 9[2-9]......

forward-digits 7


dial-peer voice 72 pots

trunkgroup FXO2

corlist outgoing css-loc

destination-pattern 9[2-9]......

forward-digits 7


dial-peer voice 11 pots

trunkgroup FXO

corlist outgoing css-ld

destination-pattern 91[2-9]..[2-9]......

forward-digits 11


dial-peer voice 112 pots

trunkgroup FXO2

corlist outgoing css-ld

destination-pattern 91[2-9]..[2-9]......

forward-digits 11


dial-peer voice 110 pots

trunkgroup FXO

corlist outgoing css-intl

destination-pattern 9011T

prefix 011


dial-peer voice 1102 pots

trunkgroup FXO2

corlist outgoing css-intl

destination-pattern 9011T

prefix 011


How do I get Ephone 1 to use FXO1 when making outbound calls, and Ephone 2 to use FXO2 when making outbound calls?


ephone 1

no multicast-moh

device-security-mode none

mac-address xxxx.xxxx.xxxx

type 7941

button 1:1

!

ephone 2

no multicast-moh

device-security-mode none

mac-address xxxx.xxxx.xxxx

type 7941

button 1:2


Correct Answer by paolo bevilacqua about 8 years 10 months ago

H, you use trunk under DN and specialized DPs for that:


dial-peer voice xxx pots

trunkgroup FXO

destination-pattern 81[2-9]......


dial-peer voice xxx pots

trunkgroup FXO2

destination-pattern 82[2-9]......



ephone-dn 1 dual-line

trunk 81


ephone-dn 2 dual-line

trunk 82


Note: since for all calls from DN 1 and 2 will prefix 81 and 82, you need to use that as an the second button and label EXTERNAL.


Note 2: since likey you're not restircitng local calling, don't use corlist on the related DP.


Note 3: There is also a way to do without "trunk". using corlist instead. But, check if the above is satisfying to you first.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (5 ratings)
Loading.
Correct Answer
paolo bevilacqua Mon, 07/14/2008 - 13:59
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

H, you use trunk under DN and specialized DPs for that:


dial-peer voice xxx pots

trunkgroup FXO

destination-pattern 81[2-9]......


dial-peer voice xxx pots

trunkgroup FXO2

destination-pattern 82[2-9]......



ephone-dn 1 dual-line

trunk 81


ephone-dn 2 dual-line

trunk 82


Note: since for all calls from DN 1 and 2 will prefix 81 and 82, you need to use that as an the second button and label EXTERNAL.


Note 2: since likey you're not restircitng local calling, don't use corlist on the related DP.


Note 3: There is also a way to do without "trunk". using corlist instead. But, check if the above is satisfying to you first.


dennis.ferree Tue, 07/15/2008 - 04:57
User Badges:

Thank you very much, this worked well in the lab, we are depolying to a multi agent site now.

paolo bevilacqua Tue, 07/15/2008 - 05:05
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Making customers happy, especially with FXOs, can take some time, fortunately CME has a full bag of tricks to use.


Thanks for the appreciation and good luck!


Ayodeji Okanlawon Tue, 07/15/2008 - 05:03
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Paolo,


Since the guy was too happy and excited about his problem been resolved he forgot to rate the post, so I helped him. +5 point for you!

paolo bevilacqua Tue, 07/15/2008 - 05:08
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Deji, I've rated your for the kindness.


Ayodeji Okanlawon Tue, 07/15/2008 - 05:14
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Thanks Paolo,


I am encouraged!

davidesmith68 Tue, 05/19/2015 - 09:47
User Badges:

I have four lines, each are directly to the FXO port but I need to use call forwarding on the FXO port to forward to voicemail. 

 

David 

Actions

This Discussion