BGP announce network

Unanswered Question
Jul 14th, 2008

Hi all,

Refer to below config. can router announce network 148.50.0.0/16? As I know, In order to make

BGP to announce network, interface subnet mask should be exactly match with

subnet mask under router bgp. That is below router can't announce network 148.50.0.0/16.

Howerver, if interface fastethernet 0/1 change to ip address 148.50.1.253 255.255.0.0. then router can announce it.

Is it right ?

!

interface FastEthernet0/1

ip address 148.50.1.253 255.255.255.0

duplex auto

speed auto

!

router eigrp zzzz

redistribute bgp xxxx metric 1024 100 200 200 1500

network 140.50.0.0

network 148.50.0.0

network 172.16.0.0

no auto-summary

no eigrp log-neighbor-changes

!

router bgp xxxx

no synchronization

bgp log-neighbor-changes

network 10.100.0.0 mask 255.255.0.0

network 10.255.2.48 mask 255.255.255.252

network 140.50.0.0

network 148.50.0.0

neighbor 10.255.2.49 remote-as yyyy

neighbor 10.255.2.49 soft-reconfiguration inbound

no auto-summary

!

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Route_reflector Tue, 07/15/2008 - 01:11

Yes, Whatever prefix you advertise using network command in BGP should have an exact match in the local routing table as well, unless otherwise you have a summarise option.

Regards,

Actions

This Discussion