07-15-2008 03:07 AM - edited 03-06-2019 12:11 AM
We have a WS-C3750G-24PS switch. when ever we tried to connect an ip phone to any free port it is not getting the power . So we have tried connecting the ip phone to another port which already one ip phone was working. That time also it didnt work and the old phone which was working also had the same problem after that. I tried giving shut/unshut to the individual port. IOS ver is c3750-ipbase-mz.122-25.SEB4. Did any one faced this problem before?Is this any know bug ??
Solved! Go to Solution.
07-15-2008 07:51 PM
You are being affected by a bug, see:
Upgrade your IOS, in order to correct the issue.
HTH,
__
Edison.
Please rate helpful posts
07-15-2008 01:24 PM
Hi,
Haven't experienced this before but you may want to give it a try by going into one of those interfaces and use: power inline never and then power inline auto.
Also, check the show post for any power issues.
Thanks,
Gary
07-15-2008 02:30 PM
Do you have port-security sticky option enabled in your switchport?
07-15-2008 07:51 PM
You are being affected by a bug, see:
Upgrade your IOS, in order to correct the issue.
HTH,
__
Edison.
Please rate helpful posts
07-15-2008 09:50 PM
Thank you Very much Edison, Will go for the ios upgrade
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: