IPM 4.0.1 issue when adding devices in sources devices

rherve · ‎07-15-2008

Hello,

When I add devices as sources devices, 'collector mgmt' 'devices' i check the box 'All devices' and then clic to 'Add devices', i arrived on the next page, there is no equipement to select ? why ?

Finaly I used the CiscoWorks Assitant to add devices in IPM, he say me that the devices successfull added to IPM... but there is nothing.

When I look in targets devices I see all the equipments

It is necessary to have RW community configure in DCR CS ?

Can I used IPM just to check and IP SLA counters configure on devices, or IPM has necessarily to send the configuration to the equipment ?

Thanks

HervÃ©

akemp · ‎07-15-2008

Do you have either rtr enable or ip sla enable on all of your devices ?

Dont use assitant for IPM, use IPM to add devices.

You need to have the RW string and IPM needs to push the configs.