07-15-2008 07:12 AM - edited 02-21-2020 02:55 AM
I mistakenly deleted the only *.bin file in my PIX 525. How canI recover it?
I am able to load the image from Monitor mode to ram, but when I am not able to tftp the bin to flash. By the way, the PIX is a seconday PIX.
07-15-2008 12:40 PM
what OS version?
you should be able to tftp back to the pix if its up and running.
07-15-2008 08:39 PM
I cannot put ip address to none of the interfaces. I think because this is a seconday PIX or failover only PIX.
07-16-2008 05:49 AM
what version OS is/was installed on it?
take it offline or if it's currently a standby pix then make sure secondary addresses are defined for at least one interface on the primary. then use this interface to copy the OS up to it.
07-17-2008 12:07 PM
I fixed the problem. I was not able to put ip address to non of the interface not because I have seconday PIX, it is because trhe PIX was in multiple context. After I swtiched it back to single context and reboot, I can put ip address to one the interface and I tftp the flash back.
Thanks for your input anyway.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide