Solved: Unity clock syncronisation

askq2forum · ‎07-15-2008

hi, trying to setup secure encrypted integration between CUCM 6 and Unity 5.0 (UM) - the integration guide states:

'CautionThe Cisco Unity system clock must be synchronized with the Cisco Unified CM system clock for Cisco Unified CM authentication to function immediately'

How is this done - any step by step guides would be useful...Jag

tim.giles · ‎07-15-2008

Hopefully this should help you.....

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008009470f.shtml

Please rate if useful....

View solution in original post

tim.giles · ‎07-15-2008

Hopefully this should help you.....

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008009470f.shtml

Please rate if useful....

thfergus · ‎07-15-2008

Upon installation of a CUCM 6.x publisher, you encouraged to have is sync with an NTP source. A Unity 5.x server will synchronize with it's domain controller. If the Unity server is also functioning as a domain controller, then you can configure it to use the same NTP as used by the CUCM6.x publisher.