07-15-2008 12:56 PM - edited 03-18-2019 09:18 PM
I have configured both sip and skinny phones but I couldn't able to establish a call between them. Also, I'm getting busy tone when dialing out using 9XXXXXXXXXX. The dial peer is pointing to a sip trunk to call manager to route to the pstn.
Below is my config:
voice rtp send-recv
!
voice service voip
media statistics
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
call start slow
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
e911
registrar server expires max 3600 min 120
!
!
voice class codec 1
codec preference 1 g711ulaw
!
!
!
!
!
!
!
!
!
!
!
voice register global
mode cme
source-address 192.168.1.2 port 5060
max-dn 128
max-pool 80
authenticate register
timezone 12
time-format 24
date-format YY-M-D
dialplan-pattern 1 830..... extension-length 5 no-reg
dst start Oct week 8 day Sun time 02:00
tftp-path flash:
!
voice register dn 1
number 83089000
name BB89000
!
voice register dn 2
number 83089001
name BB89001
!
voice register dn 3
number 83089002
name BB89002
!
voice register pool 1
id mac 0000.0008.9000
number 1 dn 1
dtmf-relay rtp-nte
username xxx password xxx
description phone1
codec g711ulaw
!
voice register pool 2
id mac 0000.0008.9001
number 1 dn 2
dtmf-relay rtp-nte
username xxx password xxx
description phone2
codec g711ulaw
!
voice register pool 3
id mac 0000.0008.9002
number 1 dn 3
dtmf-relay rtp-nte
username xxx password xxx
description phone3
codec g711ulaw
!
tftp-server flash:P00308000500.loads
tftp-server flash:P00308000500.sb2
tftp-server flash:P00308000500.sbn
!
control-plane
!
!
!
!
!
sccp local GigabitEthernet0/0
sccp ccm 192.168.1.2 identifier 1
sccp
!
sccp ccm group 1
bind interface GigabitEthernet0/0
associate ccm 1 priority 1
associate profile 1 register mtp001aa1949dc0
switchover method immediate
!
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 5
associate application SCCP
!
!
dial-peer voice 1 voip
translation-profile outgoing add9
destination-pattern .T
session protocol sipv2
session target ipv4:192.168.1.3
session transport udp
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
telephony-service
max-ephones 40
max-dn 60
ip source-address 192.168.1.2 port 2000
system message CCME 4.3
dialplan-pattern 1 89... extension-length 3 no-reg
max-conferences 12 gain -6
transfer-system full-consult
transfer-pattern 89...
create cnf-files version-stamp 7960 Jul 14 2008 20:00:51
!
!
ephone-dn 1 dual-line
number 89000
name Phone4
!
ephone 1
mac-address 0015.621B.2EF5
type 7960
button 1:1
07-21-2008 11:59 AM
Do you have a MTP configured?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide