Multiple VMs to single CCM cluster

Unanswered Question
Jul 15th, 2008
User Badges:

hi all,

Is it possible to configure two vms (nevotek adagio & unity) to CCM 6.1.

As adagio is integrated with CTI ports configured on CCM.Will it be possible to install unity in the same cluster & use it using different group of CTI ports

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jaime Valencia Wed, 07/16/2008 - 05:52
User Badges:
  • Cisco Employee,
  • Hall of Fame,


unity does not use CTI ports if you're doing a SCCP integration and even with that, there should be no issue configuring a dual integration on CUCM



if this helps, please rate

Tommer Catlin Wed, 07/16/2008 - 07:52
User Badges:
  • Green, 3000 points or more

To add, if you are using Unity 5.x, you can also use SIP to connect Unity to CUCM. But the TSP and SCCP is the way to go.


This Discussion