07-16-2008 02:04 AM
Hi all,
Friends, i have VIDEO monitoring center inside my network. Now my task is that to see this video from outside. this video device works on port tcp 5445.
I made ACL and static nat like this.
access-list Outside_access_in extended permit tcp any interface Outside
static (Inside,Outside) tcp interface 5445 192.168.2.10 5445 netmask 255.255.255.255
07-16-2008 02:32 AM
What is your question?
07-16-2008 02:47 AM
I want to see this video traffic from internet. I meant when type in browser publicIPaddree:5445 can see video. My video device (DVR) ip address is 192.168.2.15
Do i creat static nat and ACL correctly ?
thanks in advance
regards
07-16-2008 02:59 AM
Hi, your config is ok, but a better ACL would be like this :-
access-list Outside_access_in tcp any interface outside eq 5445
access-group Outside_access_in in interface outside
static (Inside,Outside) tcp interface 5445 192.168.2.10 5445 netmask 255.255.255.255
07-16-2008 03:32 AM
dhananjoychowdhury,
do not i need word PERMIT in ACL ?! And one more question ? if in the end of ACL i do not type eq 5445, it would not work properly ?
access-list Outside_access_in PERMIT tcp any interface outside eq 5445
great thank in advance :)))
Regard
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide