ciscoworks HUM mibs

francisco_1 · ‎07-16-2008

Downloaded mibs from the cisco website, copied in to CSCOpx\hum\mibmanager\mibs and changed mibs file extnesion to obj and also did the same under the CSCOpx\hum\mibmanager\mibcomplier\mibs and rename file extension to my. none of the mibs appearing under HUM.

i'm i doing anything wrong?

what i need to mibs for eigrp, hsrp and temperature.

Thanks

Joe Clarke · ‎07-16-2008

You need to actually load them using the HUM > Admin > Load MIB.

francisco_1 · ‎07-16-2008

did that also. no success.

Joe Clarke · ‎07-16-2008

HUM is very particular about how it loads MIBs. Make sure that the MIB files are named the same name as their module, and make sure you have loaded all the required dependencies first. For example, for the CISCO-EIGRP-MIB, make sure your MIB file is named CISCO-EIGRP-MIB.my, and that you have already loaded the INET-ADDRESS-MIB.

francisco_1 · ‎07-16-2008

extactly the issue here.

below are the mibs i got from http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&submitClicked=true&mibName=CISCO-EIGRP-MIB#dependencies. i need the CISCO-EIGRP-MIB but cannot load in to HUM without loading the dependencies first. right? so which one should i load first and last?

MIB Name Version 1 Version 2 Dependencies

1. SNMPv2-SMI

2. SNMPv2-TC

3. SNMPv2-CONF

4. SNMPv2-MIB

5. IANAifType-MIB

6. IF-MIB

7. CISCO-SMI

8. INET-ADDRESS-MIB

9. SNMP-FRAMEWORK-MIB

10. RFC1155-SMI

11. RFC-1212 Non-Cisco MIB | Non-Cisco MIB | -

12. RFC-1215 Non-Cisco MIB | Non-Cisco MIB | -

13. SNMPv2-TC-v1 Non-Cisco MIB | Non-Cisco MIB | -

14. CISCO-EIGRP-MIB

Joe Clarke · ‎07-16-2008

SNMPv2-SMI

SNMPv2-TC

SNMPv2-CONF

SNMPv2-MIB

IANAifType-MIB

INET-ADDRESS-MIB

SNMP-FRAMEWORK-MIB

IF-MIB

CISCO-SMI

CISCO-TC

CISCO-EIGRP-MIB