SRST with FXO to Hunt Group

Unanswered Question
Jul 16th, 2008

I am using CUCM 6.1 with SRTS to remote gateway.

The remote H323 gateway is using FXO ports, and in normal operation do a connection PLAR to a CUCM Hunt Group.

During SRTS, I would like the calls to ring to a single IP Phone. Is there a way to do this? Currently since using a PLAR to call manager DN, in SRST all incoming calls fail.

Thanks,

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Tommer Catlin Wed, 07/16/2008 - 09:10

You need to put in voice translations. Here is an example

voice translation-rule 100

rule 1 /\(.*\)/ /10000/

!

!

voice translation-profile voice

translate called 100

!

All calls coming in, ring extension 1000

Then the Translation rule is called "100"

Then we use the dial peer:

dial-peer voice 100 pots

translation-profile incoming voice

destination-pattern 9T

direct-inward-dial

port 0/0/0:23

In this case, we are using any POTS line use the translation profile incoming. The rest is just used for outbound.

Hope this helps!

Actions

This Discussion