07-16-2008 06:12 AM - edited 03-03-2019 10:45 PM
I don't have room in VWIC slots for more 2 VWIC-2MFT-T1. How else can I get data T1s in the 3725? Is thre a NM module?
The HWIC-4T1/E1 won't work in this model.
07-16-2008 06:20 AM
You can use an nm-2w plus 2 x wic-2T.
This will require however use of external DSU and serial cables, so a 28xx with the HWIC-4T1/E1 could be a better choice.
Please rate post if it helps!
07-16-2008 06:28 AM
Would 1 NM-2W= plus quantity 2 VWIC-2MFT-T1= work?
Trying to avoid external CSU/DSU.
07-16-2008 06:32 AM
It should, there is reported compatibility for that:
http://www.cisco.com/en/US/prod/collateral/routers/ps274/product_data_sheet09186a0080091b9c_ps259_Products_Data_Sheet.html
07-16-2008 06:30 AM
You can can use the NM-4T (Serial interface module) along with external CSU/DSUs.
http://www.cisco.com/en/US/prod/collateral/routers/ps274/product_data_sheet09186a0080091b8b.html
P.S. Sorry, didn't see Paolo's reply.
HTH,
__
Edison.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
