PRI Splitting

Unanswered Question
Jul 17th, 2008


I believed what I want to do is call PRI Splitting

What happened is that my customer had one range of number:

64179500 to 64179519

now, the range is not enough, and the provider give them

65129500 to 65129519

How can i configure this on a CCME, so that CCME will recongnize both set of number and pass to the respective user?

First set of user extension: 500 - 519

Second set of user extension: 600 - 619

Is this possible?


Yen Lung

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Paolo Bevilacqua Thu, 07/17/2008 - 00:28


you can number you extension so you have 500-519 and 600-619, or you can translate the second DID block to extensions 520-539.

Basically, you can do as you like better.

Please rate post if it helps!

yenlung Thu, 07/17/2008 - 00:33

Is there any special command to input into the system due to splitting of numbers on the PRI ?

yenlung Sun, 07/20/2008 - 18:38


Will aprreciate if you could help a sample config.


Yen Lung Mon, 07/21/2008 - 02:16

How are you doing this for the first set of DID's, can you not use the same method for the new range?

Or is the telco only presenting the last 3 digits, if so you will need the telco to present 8 digits.



This Discussion