WS-X6548 port group/asic monitoring

staffordrau · ‎07-17-2008

Is there a way to pull utilization stats directly from the 1-Gbps asics that each group of 8 ports share on 6548 line cards?

I'd prefer not to have to manually add the stats from each port in each 8-port group to find out if we're grossly exceeding the oversubscription rate.

Thanks...

d.hillman · ‎01-13-2009

I would love to see a reply for this question.

glen.grant · ‎01-13-2009

This is the only info I could find on oversubscription for those cards.

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801751d7.shtml#ASIC

staffordrau · ‎01-13-2009

Yes, that's all I was able to find. Note that there is not a convenient way to show that stat for a group of interfaces.

Specifically:

NativeIOS

Cat6500# show counters interface gigabitEthernet | include qos3Outlost

You would need to do that for all individual interfaces on each 6548 card in the chassis. I scripted it using the clogin script from RANCID.

d.hillman · ‎01-21-2009

The same info here. Okay was looking for the silver or lazy bullet.

gnijs · ‎05-28-2009

me too :-)