cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
631
Views
0
Helpful
11
Replies

Cannot complete inter office Conf call

rcrumm_2
Level 2
Level 2

Hi all,

I am getting an error when trying to make a conference call to another office. If I go to the PSTN and make a conf call it works.

I looked at the region codec's and they say to use g.729 to the other regions

CCM 4.1.3, h.323

Thanks,

Randall

1 Accepted Solution

Accepted Solutions

Configuring Enhanced Conferencing and Transcoding for Voice Gateway Routers

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html

CallManager and IOS Gateway DSP Farm Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080334294.shtml

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

View solution in original post

11 Replies 11

Jaime Valencia
Cisco Employee
Cisco Employee

most probably you're using a SW conference bridge that only supports G711.

Add a XCODER or use a HW CFB

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

Thanks,

How do I add an xcoder?

Thx

Randall

Configuring Enhanced Conferencing and Transcoding for Voice Gateway Routers

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html

CallManager and IOS Gateway DSP Farm Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080334294.shtml

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

Here is another question. The user just said it works on his desk phone but not P Comm. 2.0

Thanks,

RC

it probably has the optimize for low BW configured under the IPC preferences on the computer

that checkbox causes IPC to use G729

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

I initially tried that, with no luck.

RC

When the 2nd call answers i press the confrn button. Should there be a join button in the template? Maybe I have the wrong button.

Thanks,

RC

join is used when you establish calls using the hold, new call method. if doing conference press cnf 1 time, dial then press cnf again to connect parties

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

OK, just wanted to check.

so why would the desktop work and not the IP Comm.

MRG, MRGL, no access to the SW CFB, IPC and CFB in different regions

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

I am looking at the MRGLs. US has 2 groups. China has 3. The top group in the China list is the china resource group and the other 2 are the same as US.

Thanks,

RC

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: