I'm setting up a VPN for users. When they connect, they are assigned a gateway that I did not specify and I cannot locate where to correct this setting.
What's happening is the clients are being assigned a gateway based on their IP address assigned from the pool. For instance, there are two pools listed in the config...
ip local pool XXXX-vpn 10.10.77.150-10.10.77.170 mask 255.255.255.0
ip local pool XXXX-vpn 10.20.77.150-10.20.77.170 mask 255.255.255.0
So if I use the VPN with the first ip pool, they receive a default gateway of 10.10.77.1
If I use the second ip pool, they receive a gateway of 10.20.77.1
The Cisco which is assigning their IP's and is used for VPN connectivity is 10.10.77.254, which is the gateway we want to assign them. However, there is not an area in ASDM that we can find where you configure the gateway for the VPN clients.
Let me know if this does/doesn't make sense.