HP Virtual Connect and Cisco 3560G

Unanswered Question
Jul 17th, 2008
User Badges:

Dear Netpro community,


I am facing a situation. My system team has recently bought a c7000 HP blade enclosure with a Virtual connect module.


The ports have been configured to 1 blade to 1 vc port and to 1 cisco switchport. When we hook up the systems, we saw the following messages:

1d02h: %SW_MATM-4-MACFLAP_NOTIF: Host 001f.29d0.af4b in vlan 9 is flapping betwe en port Gi0/18 and port Gi0/16

1d02h: %SW_MATM-4-MACFLAP_NOTIF: Host 001f.29d0.af4b in vlan 9 is flapping betwe en port Gi0/16 and port Gi0/17

1d02h: %SW_MATM-4-MACFLAP_NOTIF: Host 001f.29d0.af4b in vlan 9 is flapping betwe en port Gi0/18 and port Gi0/16

1d02h: %SW_MATM-4-MACFLAP_NOTIF: Host 001f.29d0.af4b in vlan 9 is flapping betwe en port Gi0/16 and port Gi0/17

1d02h: %SW_MATM-4-MACFLAP_NOTIF: Host 001f.29d0.af4b in vlan 9 is flapping betwe en port Gi0/18 and port Gi0/16


The mac 001f.29d0.af4b is an internal stacking address between Virtual connect bay 1 and bay2.


The switchports has been configured in access mode and same vlan.


Pse advise.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion