Easy VPN on Cisco 857

Unanswered Question

I'm trying to connect two small offices via Cisco 857 routers. The main office's router is configured as EasyVPN Server and the other one, without static IP, as EasyVPN remote. The tunnel is already stablished and I can ping any machine in the main office from any machine in the remote one, but that's as far as I can get.

No other service works across the tunnel. I can't connect to the apache web server via http. I can't access the files in the file server either. As said before, ping is the only thing working. Any ideas?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
husycisco Fri, 07/18/2008 - 09:48
User Badges:
  • Gold, 750 points or more

Hello Hernan,

Most probably it is an ACL issue. Running config of both sites would help us to determine the issue.


a.alekseev Thu, 07/24/2008 - 04:18
User Badges:
  • Gold, 750 points or more

on the client

no access-list 1

no ip nat inside source list 1 interface Dialer0 overload

ip access-list ext NAT


deny ip host any

permit any

ip nat inside source list NAT interface Dialer0 overload

rmedici Sat, 12/20/2008 - 20:48
User Badges:


do you finally solve your problem ?


This Discussion