07-19-2008 12:33 PM - edited 03-03-2019 10:48 PM
I have cisco rouer 3825 but unable to access via SDM. Please see the configuration in attachement. i tried with https, http and via SDM loaded. getting page cant be displayed.
Please help me out
07-19-2008 08:33 PM
Can you access the device through telnet. One thing I do see is under vty there is not a "login local" entry. Here is a link for SDM
http://www.cisco.com/univercd/cc/td/doc/product/software/sdm/sdmqsg/sdmq21.htm#wp51612
07-20-2008 01:15 AM
In addition to login local, you will also need to specify privilege level 15 when configuring the VTY lines.
07-20-2008 08:51 AM
Hi,
Try following:
1. connect one PC to 192.168.32.0 segment. the IP address of PC is 192.168.32.10/24
2. launch IE
3. key in: https://192.168.32.2
You should get the login promopt.
BTW, pls check the 802.1q setting.
rdgs
07-20-2008 01:46 PM
Make sure java is installed on your PC and ip http server is also enabled on your router.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: