07-19-2008 12:34 PM - edited 03-06-2019 12:18 AM
have cisco rouer 3825 but unable to access via SDM. Please see the configuration in attachement. i tried with https, http and via SDM loaded. getting page cant be displayed.
Please help me out
07-19-2008 01:10 PM
Try adding the "ip http timeout-policy idle 60 life 86400 requests 10000" command. Assuming that you can ping the router, and SDM is installed correctly things should be working.
Mark
07-19-2008 01:37 PM
i applied the commands but still not result
belwo is output of flash
sh flash
-#- --length-- -----date/time------ path
1 38373256 Jun 3 2008 16:17:14 +00:00 c2800nm-advipservicesk9-mz.124-18.bin
2 1826 Nov 5 2007 14:30:04 +00:00 sdmconfig-28xx.cfg
3 6036480 Nov 5 2007 14:30:36 +00:00 sdm.tar
4 861696 Nov 5 2007 14:30:52 +00:00 es.tar
5 1164288 Nov 5 2007 14:31:10 +00:00 common.tar
6 1038 Nov 5 2007 14:31:28 +00:00 home.shtml
7 113152 Nov 5 2007 14:31:46 +00:00 home.tar
8 527849 Nov 5 2007 14:32:02 +00:00 128MB.sdf
9 1697952 Nov 5 2007 14:32:24 +00:00 securedesktop-ios-3.1.1.45-k9.pkg
10 416354 Nov 5 2007 14:32:46 +00:00 sslclient-win-1.1.3.173.pkg
14802944 bytes available (49213440 bytes used)
07-19-2008 01:41 PM
Can you ping the router, and the router ping your PC?
07-19-2008 03:11 PM
yes everything is working fine, this is my internet router, telnet is working, i m managing it via telnet, only SDM is not able to load.
07-19-2008 03:58 PM
What web browser are you using? Do you have java installed. There are some issues with Vista/IE7 with allowing active content to be ran. Check out this post.
Mark
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: