H323 Issue - Help

Unanswered Question
Jul 19th, 2008
User Badges:

Hi guys


I get the following debug messages while trying to make calls from one of th gateway can anybody help??


Jul 20 03:44:36.405: h323chan_chn_process_read_socket: fd=0 of type LISTENING ha

s data


Jul 20 03:44:36.405: Changing to new event: ACCEPT

h323chan_chn_accept: fd=0


Jul 20 03:44:36.405: h323chan_gw_accept: TCP connection accepted from 10.XX.XX.12

:55770 on fd=2

Jul 20 03:44:36.405: h323chan_chn_accept: Local(0x0) accepts TCP conn from 10.21

.4.12(0xA15040C) port (55770); fd=2changing from LISTENING state to ACCEPTED sta

te


Jul 20 03:44:36.409: h323chan_chn_process_read_socket: fd=2 of type ACCEPTED has

data


Hex representation of the SETUP TPKT received: 080200160504038090A26C06008135353

436700C8039303530373432303738357E007B0520B0060008914A000201400E004D002E002000410

06200640075006C002000520061007A007A006100710200010500C383A753AB80002EC1FE1274E11

D1600FF020A15076A00450C07000A15040C06B81100002EC1FE1274E11D1600FF020A15076A01000

1000AA001000F0140B50000120880C4000400010100

h225ParseData: Q.931 SETUP received on fd=2

Jul 20 03:44:36.417: h323chan_init_listen_socket: Listen fd=3 setup successful

Jul 20 03:44:36.417: compose_TunnelledSignallingMessage_ciscoNo tunnelled conten

t.

Hex representation of the CALL PROCEEDING TPKT to send.:

XXXXXXXX#08028016027E00390521C0060008914A00042800B500001240013C050100000A15

1BFDF280110C1100002EC1FE1274E11D1600FF020A15076A0100010010800100

h225CallProcRequest: Q.931 CALL PROCEEDING sent fromfd=2.

XXXXXXXX#

Jul 20 03:44:46.489: compose_TunnelledSignallingMessage_ciscoNo tunnelled conten

t.

Hex representation of the RELEASE COMPLETE TPKT to send.: 080280165A080280A27E00

22052580060008914A000411001100002EC1FE1274E11D1600FF020A15076A10800100

h225TerminateRequest: Q.931 RELEASE COMPLETE sent from fd=2. Call state changed

to [Null].

Jul 20 03:44:46.493: h323chan_chn_process_read_socket: fd=2 of type ACCEPTED has

data


Jul 20 03:44:46.493: h323chan_recvdata: Connection lost fd=2h323chan_chn_close:

Calls[1] Exist on socketfd=2 Owner[2]


Jul 20 03:44:46.493: h323chan_close: TCP connection from fd=2 closed

Jul 20 03:44:46.493: h323chan_close: TCP connection from fd=3 closed

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
pcameron Sun, 07/20/2008 - 06:20
User Badges:
  • Cisco Employee,

Call Flow is this -


Jul 20 03:44:36.409: h323chan_chn_process_read_socket: fd=2 of type ACCEPTED has data


Hex representation of the SETUP TPKT received


*** You recieve a SETUP message


Jul 20 03:44:36.417: compose_TunnelledSignallingMessage_ciscoNo tunnelled content.


Hex representation of the CALL PROCEEDING TPKT to send


**** You send Call Proceeding


Jul 20 03:44:46.489: compose_TunnelledSignallingMessage_ciscoNo tunnelled content.


Hex representation of the RELEASE COMPLETE TPKT to send


**** 10 seconds later you send Release Complete. You never sent Alerting, so the T310 timer expired between the proceeding and alerting call states. Most likely cause is a problem with the subsequent POTS leg of the call, or if this is IP2IP gateway, the second IP call leg.

mohammednw Sun, 07/20/2008 - 06:27
User Badges:

thanks for trying to help..


issue was with Route pattern...strange but ppl at one site were able to call through route pattern X with css Y.....ppl at othe site were not using the same RP and css Y....deleted the rp and re-creted the same....everything works fne now

Actions

This Discussion