07-19-2008 07:57 PM - edited 03-15-2019 12:04 PM
Hi guys
I get the following debug messages while trying to make calls from one of th gateway can anybody help??
Jul 20 03:44:36.405: h323chan_chn_process_read_socket: fd=0 of type LISTENING ha
s data
Jul 20 03:44:36.405: Changing to new event: ACCEPT
h323chan_chn_accept: fd=0
Jul 20 03:44:36.405: h323chan_gw_accept: TCP connection accepted from 10.XX.XX.12
:55770 on fd=2
Jul 20 03:44:36.405: h323chan_chn_accept: Local(0x0) accepts TCP conn from 10.21
.4.12(0xA15040C) port (55770); fd=2changing from LISTENING state to ACCEPTED sta
te
Jul 20 03:44:36.409: h323chan_chn_process_read_socket: fd=2 of type ACCEPTED has
data
Hex representation of the SETUP TPKT received: 080200160504038090A26C06008135353
436700C8039303530373432303738357E007B0520B0060008914A000201400E004D002E002000410
06200640075006C002000520061007A007A006100710200010500C383A753AB80002EC1FE1274E11
D1600FF020A15076A00450C07000A15040C06B81100002EC1FE1274E11D1600FF020A15076A01000
1000AA001000F0140B50000120880C4000400010100
h225ParseData: Q.931 SETUP received on fd=2
Jul 20 03:44:36.417: h323chan_init_listen_socket: Listen fd=3 setup successful
Jul 20 03:44:36.417: compose_TunnelledSignallingMessage_ciscoNo tunnelled conten
t.
Hex representation of the CALL PROCEEDING TPKT to send.:
XXXXXXXX#08028016027E00390521C0060008914A00042800B500001240013C050100000A15
1BFDF280110C1100002EC1FE1274E11D1600FF020A15076A0100010010800100
h225CallProcRequest: Q.931 CALL PROCEEDING sent fromfd=2.
XXXXXXXX#
Jul 20 03:44:46.489: compose_TunnelledSignallingMessage_ciscoNo tunnelled conten
t.
Hex representation of the RELEASE COMPLETE TPKT to send.: 080280165A080280A27E00
22052580060008914A000411001100002EC1FE1274E11D1600FF020A15076A10800100
h225TerminateRequest: Q.931 RELEASE COMPLETE sent from fd=2. Call state changed
to [Null].
Jul 20 03:44:46.493: h323chan_chn_process_read_socket: fd=2 of type ACCEPTED has
data
Jul 20 03:44:46.493: h323chan_recvdata: Connection lost fd=2h323chan_chn_close:
Calls[1] Exist on socketfd=2 Owner[2]
Jul 20 03:44:46.493: h323chan_close: TCP connection from fd=2 closed
Jul 20 03:44:46.493: h323chan_close: TCP connection from fd=3 closed
07-20-2008 06:20 AM
Call Flow is this -
Jul 20 03:44:36.409: h323chan_chn_process_read_socket: fd=2 of type ACCEPTED has data
Hex representation of the SETUP TPKT received
*** You recieve a SETUP message
Jul 20 03:44:36.417: compose_TunnelledSignallingMessage_ciscoNo tunnelled content.
Hex representation of the CALL PROCEEDING TPKT to send
**** You send Call Proceeding
Jul 20 03:44:46.489: compose_TunnelledSignallingMessage_ciscoNo tunnelled content.
Hex representation of the RELEASE COMPLETE TPKT to send
**** 10 seconds later you send Release Complete. You never sent Alerting, so the T310 timer expired between the proceeding and alerting call states. Most likely cause is a problem with the subsequent POTS leg of the call, or if this is IP2IP gateway, the second IP call leg.
07-20-2008 06:27 AM
thanks for trying to help..
issue was with Route pattern...strange but ppl at one site were able to call through route pattern X with css Y.....ppl at othe site were not using the same RP and css Y....deleted the rp and re-creted the same....everything works fne now
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide