I upgraded a pair of 65xx switches and I received "*LOOP_Inc" on a few of the vlans. Is there a 'better' way to fix this error other than taking the vlans off and then putting it back on again? Pretty much the commands I did are:
sho spanning-tree int po70
Vlan Role Sts Cost Prio.Nbr Type
---------------- ---- --- --------- -------- --------------------------------
VLAN0162 Desg FWD 3 128.1692 P2p
VLAN0163 Desg FWD 3 128.1692 P2p
VLAN0164 Desg FWD 3 128.1692 P2p
VLAN0165 Desg BKN*3 128.1692 P2p *LOOP_Inc
VLAN0166 Desg BKN*3 128.1692 P2p *LOOP_Inc
VLAN0167 Desg BKN*3 128.1692 P2p *LOOP_Inc
Im concerned only about vlans 165-167. Any help would be appreciated.