DHCP

somnath21 · ‎07-20-2008

Hi,

I have two Cisco 4506 switch, there 5 different DHCP pool is configured for different VLAN.Now my question is..how can I find out which IP address is free or which set of IP address is assigned to user system?What are the commands?

I have typed below two commands and didn't get any useful output.

INHYDAGL-CORE-02#sh dhcp server

DHCP server: ANY (255.255.255.255)

Leases: 0

Offers: 0 Requests: 0 Acks: 0 Naks: 0

Declines: 0 Releases: 0 Bad: 0

INHYDAGL-CORE-02#sh dhcp leas

INHYDAGL-CORE-02#sh dhcp lease

INHYDAGL-CORE-02#

Thanx,

som

kerek · ‎07-20-2008

Hi,

You can see the DHCP bindings using the show ip dhcp binding command.

Hope it helps, rate if does

Krisztian

Haris P · ‎07-21-2008

To add to this

You can also try " sh ip dhcp pool" which will give Total addresses and Leased addresses . Another command is " show ip dhcp server statistics "

" show dhcp lease " and show dhcp server " is when this router is acting as a DHCP client " show dhcp lease " Displays the DHCP addresses leased from a server

Regards

Haris