guruprasadr Sun, 07/20/2008 - 21:14
User Badges:
  • Gold, 750 points or more

HI Philip, [Pls RATE if HELPS]


To define the conditions for redistributing routes from one routing protocol into another, or to enable policy routing, use the route-map command in global configuration mode and the match and set command in route-map configuration modes. To delete an entry, use the no form of this command.


route-map map-tag [permit | deny] [sequence-number]


no route-map map-tag [permit | deny] [sequence-number]



Examples

========

The following example redistributes Routing Information Protocol (RIP) routes with a hop count equal to 1 into Open Shortest Path First (OSPF). These routes will be redistributed into OSPF as external link-state advertisements (LSAs) with a metric of 5, metric type of Type 1, and a tag equal to 1.


router ospf 109

redistribute rip route-map rip-to-ospf



route-map rip-to-ospf permit

match metric 1

set metric 5

set metric-type type1

set tag 1


Hope I am Informative.


PLS RATE if HELPS


Best Regards,


Guru Prasad R

Actions

This Discussion