07-21-2008 12:25 AM - edited 03-10-2019 04:12 AM
Hi all i configured AIP SSM 10 with a management IP 172.16.x.16/21 and gateway as 172.16.x.1 and where as my management system is 172.16.x.13/21 and with the same gateway
Iam unable to reach the AIP SSM through telnet nor through ASDM, Surprisingly i am able to ping my system from the Sensor AIP SSM when i login from ASA (session 1 )
Please help me in this regard
Solved! Go to Solution.
07-21-2008 07:53 AM
When you ran "setup" on the SSM to give an ip address, did you enter your management system's ip address in the access list in order to allow your management system to connect to the SSM?
And the external interface of your SSM (the one to which the 172.16.x.16 ip address is applied), is physically wired to the same network (vlan) to which your management server 172.16.x.13 is connected?
(I assume that the wiring is correct, if you can ping it from the SSM)
07-21-2008 07:53 AM
When you ran "setup" on the SSM to give an ip address, did you enter your management system's ip address in the access list in order to allow your management system to connect to the SSM?
And the external interface of your SSM (the one to which the 172.16.x.16 ip address is applied), is physically wired to the same network (vlan) to which your management server 172.16.x.13 is connected?
(I assume that the wiring is correct, if you can ping it from the SSM)
07-22-2008 08:28 PM
Hi marcabal u solved my problem its working i forget to configure access list during setup
thanks for ur reply
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide