07-21-2008 10:21 AM - edited 03-11-2019 06:17 AM
Hi, I am using ASA 5505 in the production and three Site to SIte Tunnel are connected with FW. The ASA 5505 CPU and RAM utilisation is getting to high. CPU is on 77 % and RAM is on 200 MB. I execute sh processed command and the details is attached. Please suggest. Thanks
Solved! Go to Solution.
07-21-2008 02:49 PM
Have you gone through this link
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008009491c.shtml
I would not worry much about the memory usage as that value is normal, but definately high cpu is a concern, try the link above.
07-21-2008 01:23 PM
sh the output "sh perf" in time of HIGH CPU.
What software version do you have?
07-21-2008 02:04 PM
We are using latest IOS version 8.03.
07-21-2008 02:15 PM
This time the CPU is on 20 to 25 % but RAM still using 185 to 200 MB. Please respond.
07-21-2008 02:49 PM
Have you gone through this link
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008009491c.shtml
I would not worry much about the memory usage as that value is normal, but definately high cpu is a concern, try the link above.
07-21-2008 02:59 PM
The general deployment release 8.0.3 does have higher memory usage on average than 7.2 specially is you have threat detection and shun enabled.
8.0.3 interim release 19 seems to address these concerns by reducing utilisation quite significantly.
Are you having any performance issues with traffic passing through the appliance?
07-21-2008 03:01 PM
not as yet...
07-21-2008 03:19 PM
I wouldn't worry about it as mentioned it is quite normal for said release.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide