How do I block a specific incoming 10 digit number for CUCM 5.1(3)

Unanswered Question
Jul 21st, 2008
User Badges:

I have a fax number 647788XXXX that continues to call a user and I will like to block the specific incoming call. I have setup a translation pattern under call routing with route option - block this pattern - call rejected but it is not working.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jaime Valencia Mon, 07/21/2008 - 12:45
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

CUCM takes decisions on called number, not calling. one all time favorite question a quick search on NetPro would have provided you the answer


Call Blocking Configuration Examples

http://www.cisco.com/en/US/customer/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml#con11


Reject Calls

http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml#reject


In case you ask, only h323 can do this.

MGCP can NOT do this


in case you want to block an outgoing call from the fax to a particular number create a route pattern with the exact number and block the call.


HTH


javalenc


if this helps, please rate

shawzabeda Tue, 07/22/2008 - 06:20
User Badges:

Thanks for the information. I did see the Netpro Q&A for the router config buy there was also the translation solution which I tried, I was hoping there was a simple config for the issue. My gateway is MGCP.

Marwan ALshawi Tue, 07/22/2008 - 19:01
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

this fax connected to your router?


Marwan ALshawi Tue, 07/22/2008 - 19:16
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

If certain destinations should be blocked, depending on the calling device or user, calling

privileges have to be configured. With calling privileges, individual classes of service can be

configured per calling device. Blocked patterns, on the other hand, generally do not allow

calls to the matched number.

Marwan ALshawi Wed, 07/23/2008 - 03:51
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

if this fax connected to your mgcp router do the following

define it as a endopoint within ur CM and put give it a css that have acce a partition lets say called p1

then make an translation-pattren leave it empty

and make the partition for this translation pattrent p1

and give it a css that dose not include any partition of ur phone

no access to ur phone


try it and let me know

shawzabeda Wed, 07/23/2008 - 11:54
User Badges:

Thanks for the information but the fax line is not on my network. This is an an inbound fax call on the PRI Gateway

Marwan ALshawi Wed, 07/23/2008 - 17:48
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

if u have ASA on the path u could do it

by useing MPF with regex


anyway good luck



Actions

This Discussion