cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
583
Views
5
Helpful
5
Replies

How to know DRAM placed in DIMMS or SIMMS

group.itsm
Level 1
Level 1

Hi, I would like to upgrade DRAM 512MB to 1 GB in Cisco 3845. Without shutdown how to know whether DRAM placed in one or two DIMMS or SIMMS.

Thanks

Yuva

1 Accepted Solution

Accepted Solutions

from the cli type "sh tech-support" you will see something like:-

Dimm 0 SPD data :

Size of dimm = 256 Megabytes

Memory Type = 0x7

There is a lot of data from the output, I suggest you log it to a text file, then search for it.

reagrds.

View solution in original post

5 Replies 5

Hi HTH,

Thanks for your reply. As per the doc i came to know that DRAM modules are placed in my cisco 3845, But i want to know exactly existing 512MB DRAM whether it is placed as single 512MB DRAM OR two 256MB DRAMs.

If it is single 512MB DRAM, i will go for purchase of another single 512MB DRAM.

OR,If it is two 256MB DRAMs, i will go for purchase single 1 GB DRAM.

So suggest me any command or solution to know above said without shutdown the Cisco 3845.

Thanks,

Yuva

from the cli type "sh tech-support" you will see something like:-

Dimm 0 SPD data :

Size of dimm = 256 Megabytes

Memory Type = 0x7

There is a lot of data from the output, I suggest you log it to a text file, then search for it.

reagrds.

it solved my confusion.Once again THANKS.

regards,

Yuva

np - glad to help.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco