cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
417
Views
0
Helpful
3
Replies

Applying MLS QoS ... Commands

pmajumder
Level 3
Level 3

Hello,

Can anyone please tell me if applying the commands "mls qos trust cos" and "mls qos trust dscp" on a 6509 running version 2.2(18)SXF10 will cause any service disruptions?

Thanks,

Pradeep

1 Accepted Solution

Accepted Solutions

andrew.prince
Level 10
Level 10

Pradeep,

Adding those commands should not affect anything that the device is currently doing. Unless you have already configured "mls qos" at the global level, and configured ingress/egress queue, mapping etc - othewise, traffic on that specific port will be subject to the QoS policy you have configured.

HTH.

View solution in original post

3 Replies 3

andrew.prince
Level 10
Level 10

Pradeep,

Adding those commands should not affect anything that the device is currently doing. Unless you have already configured "mls qos" at the global level, and configured ingress/egress queue, mapping etc - othewise, traffic on that specific port will be subject to the QoS policy you have configured.

HTH.

Thank you Andrew!

np - glad to help.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco