07-22-2008 06:12 AM - last edited on 03-25-2019 03:19 PM by ciscomoderator
Please i have diff staffs, and i want top give them diff level of telnet permission.please how will i achieve this witrh line vty ......also please explain all the vty lines. e.g line vty 5 15
07-22-2008 06:39 AM
Have done this in the past using tripleA i.e. AAA
Will you be ok from here or need more help?,
If so please do not hesitate to get back to us.
Ajaz
07-22-2008 06:48 AM
Dont really get that, pls how will i use that.just some description and reference
07-22-2008 06:59 AM
As for the line vty, this just means which vty lines can be used to log in over the network with the specified protocol (telnet, ssh, http, https). if you configure line vty 5 15 that means vty lines 5 to 15. If you specify transport input telnet you will allow telnet on those vty lines
07-22-2008 06:45 AM
Here you go buddy, managed to dig it out in not much time :-)
<http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800949d5.shtml>
hth,
Ajaz
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide