VG248 - No Dial Tone On Port

Unanswered Question
Jul 22nd, 2008
User Badges:
  • Bronze, 100 points or more

I just had my VG248 replaced and now I'm having problems with no dial tone on one port. The port will still ring on an incoming call. It appears that I'm hitting bug CSCsa71113, but I'm software version 1.3(1)ES8.2 that supposedly fixed that bug. Anyone have any ideas? I tried restarting the VG248, but I still have the problem with the same port. Thanks!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
MikeTomasko Mon, 07/28/2008 - 06:26
User Badges:
  • Bronze, 100 points or more

Looks like it actually turned out to be a bad port on the VG248. TAC had me upgrade 1.3(2), but that didn't fix the problem.

Thanks for the reply!

c.marcillat Sat, 09/25/2010 - 08:59
User Badges:


i have exactly the same problem, do you resolve your problem ?


deepagup Sat, 09/25/2010 - 12:13
User Badges:
  • Cisco Employee,

Could you define the issue and the symptoms you are running into?

MikeTomasko Mon, 09/27/2010 - 06:27
User Badges:
  • Bronze, 100 points or more

My problem ended up being a bad VG248.  After the part was swapped out, the problem went away.  I did try downgrading the firmware because there was a bug in the version I had, but that didn't fix it.  It was a hardware problem.


This Discussion