837 Config

Unanswered Question

I am trying to configure a 837 router to connect to an ADSL circuit (PPPoA) with a PIX 515e behind it. I have been given a 5 public IP address to enable this.


I just want the 837 to provide ADSL connectivity, with all access (NATing, IP Sec etc) done through the PIX.


How do I configure the 837 to do this. I assume I have to use the IP unnumbered command.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
lgijssel Wed, 07/23/2008 - 01:30
User Badges:
  • Red, 2250 points or more

That's correct.


int fa0

ip adress 255.255.255.248


int dialer0

ip unnumbered fa0


ip route 0.0.0.0 0.0.0.0


please post your config if you run into problems.


regards,

Leo

Actions

This Discussion