837 Config

neil.moore · ‎07-22-2008

I am trying to configure a 837 router to connect to an ADSL circuit (PPPoA) with a PIX 515e behind it. I have been given a 5 public IP address to enable this.

I just want the 837 to provide ADSL connectivity, with all access (NATing, IP Sec etc) done through the PIX.

How do I configure the 837 to do this. I assume I have to use the IP unnumbered command.

lgijssel · ‎07-23-2008

That's correct.

int fa0

ip adress 255.255.255.248

int dialer0

ip unnumbered fa0

ip route 0.0.0.0 0.0.0.0

please post your config if you run into problems.

regards,

Leo

neil.moore · ‎07-23-2008

Thanks, thought so. Will let you know if I have problems