07-22-2008 09:29 AM - edited 03-15-2019 12:07 PM
Hi,
Setup at Location A:
IP Phone Ext 111---CCM Cluster--Voice GW---PSTN
IP PHone 111 can call PSTN from Location A.
There are other phones at Location B registered to same CCM Cluster but those phones can't dial PSTN.
Now if someone physically moves IP Phone 111 to location B, the user can dial PSTN as usual.
Is there a way to prevent IP Phone 111 from making PSTN call when moved to location B without changing any config on CCM?
Thanks for your time.
Thanks,
inner_silence
07-22-2008 10:24 AM
you need to do some configuration if you want that, you would need to configure device mobility if you have 4.2(x) or 6.(x) to modify the CSS accordingly.
HTH
javalenc
if this helps, please rate
07-22-2008 10:26 AM
Does Location B have a voice GW present?
How is Location B connected to Location A?
We need more info to know what's possible and what's not.
07-23-2008 08:30 AM
Hi,
Thanks all for your time.
Location B and Location A are connected via MPLS. CCM Version 5.1.
I am still looking forward to know how can I meet this requirement.
thanks,
inner_silence
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide