SIP-200 Combination

Unanswered Question
Jul 22nd, 2008
User Badges:
  • " /> Participante em Destaque,

    Prêmio"Escolha dos membros": novembro de 2014

Hi Guys,


Anybody have Idea how I can to do the combination SIP-200? I have the bellow scenario:


NAME #sh module 13

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

13 0 4-subslot SPA Interface Processor-200 7600-SIP-200 JAE1050GWWF


Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

13 0019.0656.fb00 to 0019.0656.fb3f 1.3 12.2(33)SRB3 12.2(33)SRB3 Ok


Mod Sub-Module Model Serial Hw Status

---- --------------------------- ------------------ ----------- ------- -------

13/0 1xCHSTM1 SPA SPA-1XCHSTM1/OC3 JAB105105HQ 2.0 Ok

13/1 2xOC3 ATM SPA SPA-2XOC3-ATM JAE1139Y4OJ 1.1 Ok

13/2 1xCHSTM1 SPA SPA-1XCHSTM1/OC3 JAE11430YET 2.0 Ok


It's possible attach another 1XCGSTM1/OC3 in this Slot?


Thank You,


Wilson

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Jerry Ye Tue, 07/22/2008 - 18:48
User Badges:
  • Cisco Employee,

Hi, I will assume so, since you only use up 3 slots. However, I am not sure about the performance, please check with your Cisco account team for more info.


The only statement I found on the data sheet is

"Four SPA bays per Cisco 7600 SIP-200. The SIP-200 supports oversubscription."


http://www.cisco.com/en/US/prod/collateral/routers/ps368/product_data_sheet0900aecd8027c9df.html


HTH,

jerry

Actions

This Discussion