WLC Redundancy over L3 link

Unanswered Question
Jul 22nd, 2008
User Badges:

Hi All,

Is it possible to deploy WLC redundancy over L3 link???

In our scenario we have 2 controllers located in 2 different sites, the link between the site is L3. AP's are deployed across four other locations, two are coming to site 1 and rest two are coming to site 2 . How can i make redundancy on this setup , Please advice

Controller is 4404 and AP's are 1231G series .


Aslam ...

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Scott Fella Wed, 07/23/2008 - 04:59
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

What is your link between each site? Also, I suppose your ap's are running in H-REAP mode? If you don't have enough bandwidth, then you shouldn't try it. You can always try to move the ap's to either wlc and see if users have any issues or not, before you try to deploy redundancy in this matter.


This Discussion